Doç. Dr. ENGİN KOCAMAN

HAVACILIK VE UZAY MÜHENDİSLİĞİ | Havacılık ve Uzay Mühendisliği

Academic Competence

Contact information

enginkocaman

03722911970

International Articles

WOS.SCI 0 DOI

Effect of multi-directional forging in a closed die after extrusion on Gd and Y added AZ61 Mg alloy

Ozdamar, O , Yetmez, M , Kocaman, E , Turen, Y , Ozyigit, HA
MATERIALS SCIENCE AND TECHNOLOGY | 2026

SCI-Expanded

Effect of Grain Size on Machinability and Corrosion Behavior of CuZn19Al6 Aircraft Bronze Alloy

KOCAMAN ENGİN , KÖKLÜ UĞUR, GEÇGEL BERKAY, MORKAVUK SEZER
International Journal of Metalcasting Volume 20 issue 4 | 2026

SCI-Expanded

Effect of Different Heat Treatment Procedures on the Corrosion Behavior of High-Manganese Austenitic Steels

GÜROL UĞUR, KOCAMAN ENGİN
International Journal of Metalcasting Volume 19 | 2025

WOS.SCI 3 DOI

Effect of Different Heat Treatment Procedures on the Corrosion Behavior of High-Manganese Austenitic Steels

Gürol, U , Kocaman, E
INTERNATIONAL JOURNAL OF METALCASTING | 2025

WOS.SCI 35 DOI

Effect of post-deposition heat treatments on high-temperature wear and corrosion behavior of Inconel 625

Kocaman, E , Gürol, U , Günen, A , Çam, G
MATERIALS TODAY COMMUNICATIONS Volume 42 | 2025

WOS.SCI 2 DOI

Abrasive wear behavior of functionally graded Al₃Ti reinforced aluminum matrix composite

Yildiz, ETY , Savas,Ö , Baser, MS , Kocaman, E
CHINA FOUNDRY Volume 22 | 2025

ESCI

Gd ve Y ilave Edilmiş AZ31 Magnezyum alaşımına Ekstrüzyon ve Çok Yönlü Dövme Prosesinin Etkisi

ÖZDAMAR OSMAN, YETMEZ MEHMET, TÜREN YUNUS, KOCAMAN ENGİN , ÖZYİĞİT HAMDİ ALPER
Journal of Polytechnic Volume 28 issue 2 | 2025

SCI-Expanded 4 DOI

Comparison of the mechanical properties and drilling performance of the AISI 316 parts produced with casting, LPBF and WAAM

KOCAMAN ENGİN , KÖKLÜ UĞUR, COŞKUN MERT, KOÇAR OĞUZ, DİLİBAL SAVAŞ (1 more authors)
Journal of the Brazilian Society of Mechanical Sciences and Engineering Volume 46 | 2024

WOS.SCI 9 DOI

Machining-Induced Damage and Corrosion Behavior of Monel-400 Alloy Under Cryogenic Cooling Conditions: A Sustainable Initiative

Demirbas, A , Köklü, U , Morkavuk, S , Giasin, K , Kocaman, E (1 more authors)
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY | 2024

WOS.ESCI 0 DOI

The Effect of Extrusion and Multidirectional Forging Processes on Gd and Y Added AZ31 Magnesium Alloy

Özdamar, O , Yetmez, M , Türen, Y , Kocaman, E , Özyigit, HA
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI | 2024

WOS.SCI 2 DOI

Corrosion Behaviour of Al/(TiB₂ + -Al₃Ti)-Based Functional Grade Metal Matrix Composite by Sedimentation Method

Kocaman, E , Aydin, H , Yigit, K , Caliskan, F , Savas, Ö
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS Volume 77 | 2024

WOS.SCI 1 DOI

Effect of Boron and Carbon on the Surface-Alloyed Layers with Fe_(15-x)MoTiB_xMn₂C (x=0,1,2,3)-Based Covered Electrodes

Recep, H , Kocaman, E , Kilinç, B , Saduman, S , Ugur, S
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Volume 33 | 2024

WOS.SCI 4 DOI

The Effects of Aging Process After Solution Heat Treatment on Drilling Machinability of Corrax Steel

Güldibi, AS , Köklü, U , Koçar, O , Kocaman, E , Morkavuk, S
EXPERIMENTAL TECHNIQUES Volume 48 | 2024

SCI-Expanded

Corrosion Behaviour of Al/(TiB2 + -Al3Ti)-Based Functional Grade Metal Matrix Composite by Sedimentation Method

KOCAMAN ENGİN , AYDIN Hasan, YİĞİT KENAN, ÇALIŞKAN FATİH, SAVAŞ ÖMER
Transactions of the Indian Institute of Metals Volume 77 issue 8 | 2024

SCI-Expanded

Effect of Boron and Carbon on the Surface-Alloyed Layers with Fe(15−x)MoTiBxMn2C (x = 0,1,2,3)-Based Covered Electrodes

HOCAOĞLU Recep, KOCAMAN ENGİN , KILINÇ BÜLENT, ŞEN ŞADUMAN, ŞEN UĞUR
Journal of Materials Engineering and Performance Volume 33 issue 22 | 2024

SCI-Expanded 7 DOI

Effect of the Molybdenum Content on Wear and Corrosion Behavior of Fe-B-Based Surface-Alloyed Layer

KOCAMAN ENGİN
Coatings Volume 13 issue 12 | 2023

SCI-Expanded 5 DOI

Effect of Silicon on Machinability in AlSi6, AlSi12 and AlSi18 Alloys

Geçgel Berkay, Altıntaş Yusuf, Arslan Muhammet Yasir, Çelen Okan Özcan, KOCAMAN ENGİN (2 more authors)
Silicon Volume 16 | 2023

WOS.SCI 62 DOI

A comparative study on the microstructure, mechanical properties, wear and corrosion behaviors of SS 316 austenitic stainless steels manufactured by casting and WAAM technologies

Gürol, U , Kocaman, E , Dilibal, S , Koçak, M
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY Volume 47 | 2023

WOS.SCI 10 DOI

Effect of Al5Ti1B and Al8B on the microstructure, wear and corrosion behavior of CuZn19Al6 bronze alloy

Kocaman, E
MATERIALS TODAY COMMUNICATIONS Volume 36 | 2023

TR DİZİN

Toz Metalurjisi Yöntemi ile Tane İnceltici Üretimi ve Döküm Performansının İncelenmesi

KOCAMAN ENGİN, Can Ramazan, KUNDURACI NAZIM , KURNAZ SÜLEYMAN CAN
Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi Volume 15 issue 1 | 2023

TR DİZİN

Effect of Al5Ti1B Grain Refiner and Al10Sr Modifier on Mechanical Properties and Corrosion Behavior of A360 Alloy

KOCAMAN ENGİN , ŞİRİN SELÇUK
International Journal of Automotive Science and Technology Volume 7 issue 1 | 2023

TR DİZİN

Toz Metalurjisi Yöntemi ile Tane İnceltici Üretimi ve Döküm Performansının İncelenmesi

KOCAMAN ENGİN , Can Ramazan, KUNDURACI NAZIM, KURNAZ SÜLEYMAN CAN
Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi Volume 15 issue 1 | 2023

TR DİZİN

Etial 180 alaşımına ilave edilen bakırın mikroyapı, sertlik ve korozyon üzerindeki etkisi

KOCAMAN ENGİN , BAYSAL ERHAN, KOÇAR OĞUZ, GÜLDİBİ AHMET SERDAR, ŞİRİN SELÇUK
Omer Halisdemir Universitesi Mühendislik Bilimleri Dergisi Volume 12 issue 2 | 2023

SCI-Expanded 10 DOI

An Overview of Deformation Path Shapes on Equal Channel Angular Pressing

BAYSAL ERHAN, KOÇAR OĞUZ, KOCAMAN ENGİN , KÖKLÜ UĞUR
Metals Volume 12 issue 11 | 2022

WOS.SCI 18 DOI

In-situ TiB₂ and Fe₂Ti intermetallic assisted hard coatings by Fe-Ti-B based hardfacing electrodes

Kocaman, E , Kilinç, B , Sen, S , Sen, U
JOURNAL OF ALLOYS AND COMPOUNDS Volume 900 | 2022

WOS.SCI 8 DOI

Development of Surface Properties with In Situ TiB₂ Intermetallic-Assisted Coating by Fe_(18-X)Ti₂B_X (x=3,4,5)-Based Electrodes

Kocaman, E , Kilinç, B , Sen, S , Sen, U
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING Volume 47 | 2022

TR DİZİN

Al7075 Alaşımına İlave Edilen Al-5Ti-1B Tane İncelticinin Yaşlanma, Mikroyapı, Sertlik ve Korozif Özellikleri Üzerindeki Etkisi

Yaman Mete Berke, KOCAMAN ENGİN , AVAR BARIŞ
Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji Volume 10 issue 4 | 2022

SCI-Expanded DOI

Effect of titanium content on the microstructure and wear behavior of Fe(13-x)TixB7 (x=0-5) hardfacing alloy

KILINÇ BÜLENT, KOCAMAN ENGİN , ŞEN ŞADUMAN, ŞEN UĞUR
Journal of Mining and Metallurgy, Section B: Metallurgy Volume 58 issue 1 | 2022

SCI-Expanded DOI

In-situ TiB2 and Fe2Ti intermetallic assisted hard coatings by Fe-Ti-B based hardfacing electrodes

KOCAMAN ENGİN , KILINÇ BÜLENT, ŞEN ŞADUMAN, ŞEN UĞUR
Journal of Alloys and Compounds Volume 900 | 2022

SCI-Expanded DOI

Development of Surface Properties with In Situ TiB2 Intermetallic-Assisted Coating by Fe(18-X)Ti2BX (x = 3,4,5)-Based Electrodes

KOCAMAN ENGİN , KILINÇ BÜLENT, ŞEN ŞADUMAN, ŞEN UĞUR
Arabian Journal for Science and Engineering Volume 47 issue 7 | 2022

WOS.SCI 12 DOI

Effect of vanadium content on the microstructure and wear behavior of Fe_(13-x)V_xB7 (x=0-5) based hard surface alloy layers

Kilinç, B , Kocaman, E , Sen, S , Sen, U
MATERIALS CHARACTERIZATION Volume 179 | 2021

WOS.SCI 23 DOI

The influence of chromium content on wear and corrosion behavior of surface alloyed steel with Fe_(16-x)Cr_x(B,C)₄ electrode

Kocaman, E , Kilinç, B , Durmaz, M , Sen, S , Sen, U
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH Volume 24 | 2021

WOS.SCI 2 DOI

Dry Sliding Wear Behavior of Cr-Al-N Diffusion Coatings against Silicon Nitride

Kilinç, B , Kocaman, E , Sen, S , Sen, U
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Volume 30 | 2021

WOS.SCI 10 DOI

Effect of chromium content on Fe_(18-x)Cr_xB₂(X=3,4,5) hardfacing electrode on microstructure, abrasion and corrosion behavior

Kocaman, E , Kilinç, B , Sen, S , Sen, U
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY Volume 36 | 2021

WOS.SCI 9 DOI

Artificial Neural Network Modeling of Grain Refinement Performance in AlSi10Mg Alloy

Kocaman, E , Sirin, S , Dispinar, D
INTERNATIONAL JOURNAL OF METALCASTING Volume 15 | 2021

SCI-Expanded DOI

Effect of vanadium content on the microstructure and wear behavior of Fe(13-)VxB7 (x = 0-5) based hard surface alloy layers

KILINÇ BÜLENT, KOCAMAN ENGİN , ŞEN UĞUR, ŞEN ŞADUMAN
Materials Characterization Volume 179 issue 2021 | 2021

TR DİZİN DOI

AISI 430 Çeliklerin Derin Kroyonejik İşlem Sonrası Mekanik ve Mikroyapısal Özelliklerinin İncelenmesi

Şenel Serdar, KOÇAR OĞUZ, KOCAMAN ENGİN , ÖZDAMAR OSMAN
European Journal of Science and Technology issue 32 | 2021

SCI-Expanded DOI

Krom içeriğinin Fe(18-x)CrxB2 (X=3,4,5) sert dolgu elektrotunda mikroyapı, aşınma ve korozyon davranışı üzerindeki etkisi

KOCAMAN ENGİN , KILINÇ BÜLENT, ŞEN ŞADUMAN, ŞEN UĞUR
Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi Volume 36 issue 1 | 2021

SCI-Expanded DOI

The influence of chromium content on wear and corrosion behavior of surface alloyed steel with Fe(16−x)Crx(B,C)4 electrode

KOCAMAN ENGİN , KILINÇ BÜLENT, DURMAZ MUSTAFA, ŞEN ŞADUMAN, ŞEN UĞUR
Engineering Science and Technology, an International Journal Volume 24 issue 2 | 2021

WOS.SCI 9 DOI

Ultra-fine beta SiC nanowires Isothermally converted from high activated silica by Carbothermic Reduction and Carburization at low temperature

Kocaman, E , Caliskan, F
MATERIALS CHEMISTRY AND PHYSICS Volume 256 | 2020

WOS.SCI,WOS.ISTP 3 DOI

Synthesis of B₄C-SiC in-Situ Composite Powders through Carbothermic Reactions

Caliskan, F , Kocaman, E , Tehçi, T
ACTA PHYSICA POLONICA A Volume 134 | 2018

WOS.SCI,WOS.ISTP 14 DOI

Fabrication of Functional Graded Al2124 Composite Reinforced with Al₂O₃ Particles

Caliskan, F , Cömert, S , Kocaman, E
ACTA PHYSICA POLONICA A Volume 131 | 2017

WOS.SCI,WOS.ISTP 6 DOI

Synthesis of the in-Situ Si₃N₄-SiC Composite Nano Powders by Carbothermal Reduction

Caliskan, F , Kocaman, E , Cömert, S
ACTA PHYSICA POLONICA A Volume 131 | 2017

SCI-Expanded DOI

Fabrication of Functional Graded Al2124 Composite Reinforced with Al2O3 Particles

ÇALIŞKAN FATİH, CÖMERT Semih, KOCAMAN ENGİN
Acta Physica Polonica A Volume 131 issue 3 | 2017

SCI-Expanded DOI

Synthesis of the in-Situ Si3N4-SiC Composite Nano Powders by Carbothermal Reduction

ÇALIŞKAN FATİH, KOCAMAN ENGİN , CÖMERT SEMİH
Acta Physica Polonica A Volume 131 issue 3 | 2017

SCI-Expanded DOI

Determination of the critical fraction of solid during the solidification of a PM-cast aluminium alloy

KAYIKCI RAMAZAN, ÇOLAK MURAT, ŞİRİN SELÇUK, KOCAMAN ENGİN , AKAR NEŞET
Materiali in tehnologije Volume 49 issue 5 | 2015

Doç. Dr. ENGİN KOCAMAN

Effect of multi-directional forging in a closed die after extrusion on Gd and Y added AZ61 Mg alloy

Effect of Grain Size on Machinability and Corrosion Behavior of CuZn19Al6 Aircraft Bronze Alloy

Effect of Different Heat Treatment Procedures on the Corrosion Behavior of High-Manganese Austenitic Steels

Effect of Different Heat Treatment Procedures on the Corrosion Behavior of High-Manganese Austenitic Steels

Effect of post-deposition heat treatments on high-temperature wear and corrosion behavior of Inconel 625

Abrasive wear behavior of functionally graded Al3Ti reinforced aluminum matrix composite

Gd ve Y ilave Edilmiş AZ31 Magnezyum alaşımına Ekstrüzyon ve Çok Yönlü Dövme Prosesinin Etkisi

Comparison of the mechanical properties and drilling performance of the AISI 316 parts produced with casting, LPBF and WAAM

Machining-Induced Damage and Corrosion Behavior of Monel-400 Alloy Under Cryogenic Cooling Conditions: A Sustainable Initiative

The Effect of Extrusion and Multidirectional Forging Processes on Gd and Y Added AZ31 Magnesium Alloy

Corrosion Behaviour of Al/(TiB2 + -Al3Ti)-Based Functional Grade Metal Matrix Composite by Sedimentation Method

Effect of Boron and Carbon on the Surface-Alloyed Layers with Fe(15-x)MoTiBxMn2C (x=0,1,2,3)-Based Covered Electrodes

The Effects of Aging Process After Solution Heat Treatment on Drilling Machinability of Corrax Steel

Corrosion Behaviour of Al/(TiB2 + -Al3Ti)-Based Functional Grade Metal Matrix Composite by Sedimentation Method

Effect of Boron and Carbon on the Surface-Alloyed Layers with Fe(15−x)MoTiBxMn2C (x = 0,1,2,3)-Based Covered Electrodes

Effect of the Molybdenum Content on Wear and Corrosion Behavior of Fe-B-Based Surface-Alloyed Layer

Effect of Silicon on Machinability in AlSi6, AlSi12 and AlSi18 Alloys

A comparative study on the microstructure, mechanical properties, wear and corrosion behaviors of SS 316 austenitic stainless steels manufactured by casting and WAAM technologies

Effect of Al5Ti1B and Al8B on the microstructure, wear and corrosion behavior of CuZn19Al6 bronze alloy

Toz Metalurjisi Yöntemi ile Tane İnceltici Üretimi ve Döküm Performansının İncelenmesi

Effect of Al5Ti1B Grain Refiner and Al10Sr Modifier on Mechanical Properties and Corrosion Behavior of A360 Alloy

Toz Metalurjisi Yöntemi ile Tane İnceltici Üretimi ve Döküm Performansının İncelenmesi

Etial 180 alaşımına ilave edilen bakırın mikroyapı, sertlik ve korozyon üzerindeki etkisi

An Overview of Deformation Path Shapes on Equal Channel Angular Pressing

In-situ TiB2 and Fe2Ti intermetallic assisted hard coatings by Fe-Ti-B based hardfacing electrodes

Development of Surface Properties with In Situ TiB2 Intermetallic-Assisted Coating by Fe(18-X)Ti2BX (x=3,4,5)-Based Electrodes

Al7075 Alaşımına İlave Edilen Al-5Ti-1B Tane İncelticinin Yaşlanma, Mikroyapı, Sertlik ve Korozif Özellikleri Üzerindeki Etkisi

Effect of titanium content on the microstructure and wear behavior of Fe(13-x)TixB7 (x=0-5) hardfacing alloy

In-situ TiB2 and Fe2Ti intermetallic assisted hard coatings by Fe-Ti-B based hardfacing electrodes

Development of Surface Properties with In Situ TiB2 Intermetallic-Assisted Coating by Fe(18-X)Ti2BX (x = 3,4,5)-Based Electrodes

Effect of vanadium content on the microstructure and wear behavior of Fe(13-x)VxB7 (x=0-5) based hard surface alloy layers

The influence of chromium content on wear and corrosion behavior of surface alloyed steel with Fe(16-x)Crx(B,C)4 electrode

Dry Sliding Wear Behavior of Cr-Al-N Diffusion Coatings against Silicon Nitride

Effect of chromium content on Fe(18-x)CrxB2(X=3,4,5) hardfacing electrode on microstructure, abrasion and corrosion behavior

Artificial Neural Network Modeling of Grain Refinement Performance in AlSi10Mg Alloy

Effect of vanadium content on the microstructure and wear behavior of Fe(13-)VxB7 (x = 0-5) based hard surface alloy layers

AISI 430 Çeliklerin Derin Kroyonejik İşlem Sonrası Mekanik ve Mikroyapısal Özelliklerinin İncelenmesi

Krom içeriğinin Fe(18-x)CrxB2 (X=3,4,5) sert dolgu elektrotunda mikroyapı, aşınma ve korozyon davranışı üzerindeki etkisi

The influence of chromium content on wear and corrosion behavior of surface alloyed steel with Fe(16−x)Crx(B,C)4 electrode

Ultra-fine beta SiC nanowires Isothermally converted from high activated silica by Carbothermic Reduction and Carburization at low temperature

Synthesis of B4C-SiC in-Situ Composite Powders through Carbothermic Reactions

Fabrication of Functional Graded Al2124 Composite Reinforced with Al2O3 Particles

Synthesis of the in-Situ Si3N4-SiC Composite Nano Powders by Carbothermal Reduction

Fabrication of Functional Graded Al2124 Composite Reinforced with Al2O3 Particles

Synthesis of the in-Situ Si3N4-SiC Composite Nano Powders by Carbothermal Reduction

Determination of the critical fraction of solid during the solidification of a PM-cast aluminium alloy

En Son Gelişmelerden Haberdar Olun!

Abrasive wear behavior of functionally graded Al₃Ti reinforced aluminum matrix composite

Corrosion Behaviour of Al/(TiB₂ + -Al₃Ti)-Based Functional Grade Metal Matrix Composite by Sedimentation Method

Effect of Boron and Carbon on the Surface-Alloyed Layers with Fe_(15-x)MoTiB_xMn₂C (x=0,1,2,3)-Based Covered Electrodes

In-situ TiB₂ and Fe₂Ti intermetallic assisted hard coatings by Fe-Ti-B based hardfacing electrodes

Development of Surface Properties with In Situ TiB₂ Intermetallic-Assisted Coating by Fe_(18-X)Ti₂B_X (x=3,4,5)-Based Electrodes

Effect of vanadium content on the microstructure and wear behavior of Fe_(13-x)V_xB7 (x=0-5) based hard surface alloy layers

The influence of chromium content on wear and corrosion behavior of surface alloyed steel with Fe_(16-x)Cr_x(B,C)₄ electrode

Effect of chromium content on Fe_(18-x)Cr_xB₂(X=3,4,5) hardfacing electrode on microstructure, abrasion and corrosion behavior

Synthesis of B₄C-SiC in-Situ Composite Powders through Carbothermic Reactions

Fabrication of Functional Graded Al2124 Composite Reinforced with Al₂O₃ Particles

Synthesis of the in-Situ Si₃N₄-SiC Composite Nano Powders by Carbothermal Reduction